Sign up for Triflo E-news
|
|
| |
3" & 4" HIGH SHEAR, LOW PRESSURE MUD HOPPER
Complete with 2" nozzle, venturi, funnel, sack table, 4" butterfly valve, all mounted on base.
This standard 2" nozzle handles 6-8 sacks/minute of barite and 3-4 sacks/minute gel. Three (3) inch male NPT inlet by 4" weld end outlet. Unit primed with carbon-zinic and painted with high solid two part setting epoxy.
|
|
| |
3", 4", 6" HIGH VOLUME HOPPER
The hopper is used with high volume centrifugal pumps, normally on offshore rigs and large land rigs. A butterfly valve is incorporated in the neck of the hopper to adjust flow and to close off the hopper after use.
The hopper comes complete with nozzle, venturi, funnel, sack table, butterfly valve all mounted on a base.
This standard 2" nozzle handles 8 sacks/minute of barite and 4-sacks/minute gel. Three (3) inch male NPT inlet by 6" weld end outlet.
The 6" hopper is used with 6" or 8" high volume centrifugal pumps, normally on offshore rigs and large land rigs. A butterfly valve is incorporated in the neck of the hopper to adjust flow and to close off the hopper after use.
|
|
