PRESSURE CONTROL

Tri-Flo Choke Panels DESCRIPTION: The Tri-Flo skid-mounted choke panel is a durable stainless steel choke control station which is located on the rig floor and provides the means of hydraulically opening and closing the service choke in the manifold. Full panels may be positioned in key areas away from the rig floor to control a gas kick. Auxillary panels are available which mount on the main panel to control a second hydraulic choke.

FEATURES: Large, easy-to-read gauges (drill pipe and stand pipe pressure) Safety feature - hydraulically actuated with soluble oil and water solution Variable speed fingertip control throttle valve Durable stainless steel panel Manual automatic mode on panel Console provides explosion-proofed instrumentation            Drill pipe            Stand pipe            Stroke rate meter and counters Console is mounted on skid for easier handling

Tri-Flo Choke Panels Width 2'- 3" Length 3'- 1" Height 4'- 3" Weight 750 lbs

	Tri-Flo Pressure Gauges FEATURES: Case Material - Stainless Steel; solid front, front flange Temperature Compensation - "Internal breathing diaphragm" compensating element Bezel Material - Stainless Steal Socket - Brass, 316 Stainless Steel or Alloy Steel Bourdon Tube - Phosphor Bronze, 316 Stainless Steel Accuracy - 1o of scale Connection - Panel = 1/2" low back male Fill Fluid - Glycerine (Silicone available) Lens - Acrylic Dial - White with black and red markings "O" Rings - Buna-N Model Numbers -            LFP 610 = Brass            LFP 611 = Alloy Steel            LFP 612 = Stainless Steel	Range Figure Intervals Smallest Interval 0-10,000 psi 1000 100 0-15,000 psi 1000 100 Some ranges not available on all models.

Tri-Flo Stroke Counter The Tri-Flo pump stoke counter offers: Accuracy, safety and simplicity. Because of the internal lithium batteries, no rig power is needed and batteries have a 5-year lifetime. Unit is constructed of stainless steel and is protected against dust, water and corrosion. Displays "total strokes" (0-9999) and "strokes per minute" (6-450 GPM) on large LCD's which are readable in bright sunlight and near total darkness. A "test" switch allows driller to check counter operation and accuracy. Tri-Flo Pressure Sensors for Standpipe FEATURES: 10,000 and 15,000 psi sensors available. All stainless steel body using a piston as seal between mud and hydraulic fluid to transmit pressure from sensors to gauge. This system prevents mud invasion into hydraulic lines if a line is ever broken.

BACK     TOP     NEXT